=========================================================================== Packet: BBYTE Date: 04-12-94 (20:13) Number: 1040 From: WAYNE DELISLE SR. Refer#: NONE To: DON CUSTER Recvd: NO Subj: PCjr to CGA display adapter Conf: (22) CLTTECH --------------------------------------------------------------------------- Subject: PCjr to CGA display adapter Don, Here is the info on building the PCjr Display cable adapter. I bought all the parts at Radio Shack including 5' of shielded cable for less then $5.00. For the 2x9 berg connector, I used a broken connector I had removed from an old floppy drive cable and cut down to size. I used a cheap plastic 9 pin D shell hood and hacked it up with an exacto knife and super-glued it together for the cover. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ PCjr Display Cable Specifications Ä PCjr to CGA Monitor ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ PCjr 9ÄPIN SYSTEM COLOR CONNECTOR DISPLAY D CABLE CONNECTOR ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ (DÄSHELL) A1 ÄÄÄÄÄÄÄÄÄÄ´ NOT USED ³ A2 ÄÄÄÄÄÄÄÄÄÄ´ NOT USED ³ A3 ÄÄÄÄÄÄÄÄÄÄ´ NOT USED ³ A4 ÄÄÄÄÄÄÄÄÄÄ´ RED ÃÄÄÄÄÄÄÄÄÄÄ 5 A5 ÄÄÄÄÄÄÄÄÄÄ´ GREEN ÃÄÄÄÄÄÄÄÄÄÄ 3 A6 ÄÄÄÄÄÄÄÄÄÄ´ BLUE ÃÄÄÄÄÄÄÄÄÄÄ 6 A7 ÄÄÄÄÄÄÄÄÄÄ´ INTENSITY ÃÄÄÄÄÄÄÄÄÄÄ 4 A8 ÄÄÄÄÄÄÄÄÄÄ´ NOT USED ³ A9 ÄÄÄÄÄÄÄÄÄÄ´ NOT USED ³ B1 ÄÄÄÄÄÄÄÄÄÄ´ VERTICAL ÃÄÄÄÄÄÄÄÄÄÄ 9 B2 ÄÄÄÄÄÄÄÄÄÄ´ NOT USED ³ B3 ÄÄÄÄÄÄÄÄÄÄ´ HORIZONTAL ÃÄÄÄÄÄÄÄÄÄÄ 8 B4 ÄÄÄÄÄÄÄÄÄÄ´ NOT USED ³ B5 ÄÄÄÄÄÄÄÄÄÄ´ GROUND ÃÄÄÄÄÄÄÄÄÄÄ 2 B6 ÄÄÄÄÄÄÄÄÄÄ´ NOT USED ³ B7 ÄÄÄÄÄÄÄÄÄÄ´ NOT USED ³ B8 ÄÄÄÄÄÄÄÄÄÄ´ NOT USED ³ B9 ÄÄÄÄÄÄÄÄÄÄ´ GROUND ÃÄÄÄÄÄÄÄÄÄÄ 1 ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ FRONT VIEW FRONT VIEW \ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ/ A9 ÚÄÂÄÂÄÂÄÂÄÂÄÂÄÂÄÂÄ¿ A1 \1 o o o o o 5/ ÃÄÅÄÅÄÅÄÅÄÅÄÅÄÅÄÅÄ´ \6 o o o o 9/ B9 ÀÄÁÄÁÄÁÄÁÄÁÄÁÄÁÄÁÄÙ B1 \ÄÄÄÄÄÄÄÄÄ/ CGA Adapter for PCjr Display ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ This Document gives some Technical Information on the IBM PCjr Color Display, Diagrams and Data for building a cable to adapt the PCjr Display to the IBM Color Graphics Adapter (CGA) Card. Designed at home on my IBM PCjr and Tested on my IBM XT286 with CGA and PCjr Display. Also work with the IBM Convertible Displays, and with EGA card in CGA mode. Reference: 1) "IBM Hardware Maintenance and Service: PCjr" 2) "Installation Instructions for the Color Graphics Adapter," 3) "Installation Instructions for the Enhanced Graphics Adapter." PCjr Display Pinout vs. CGA ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ PCjr RGB output is: PC CGA output pin is: A01 - TV Vertical drive ................ n/a A02 Gnd A03 - TV Horizontal drive .............. n/a A04 Blue ............................. 5 Blue A05 Red ............................... 3 Red A06 Intensity ........................ 6 Intensity A07 Green ............................. 4 Green A08 - Comp Sync drive .................. n/a A09 Audio out ........................ n/a B01 + Vert drive out ................... 9 +Vertical B02 Gnd B03 + Horz drive out ................... 8 +Horizontal B04 Gnd B05 Gnd .............................. 2 Ground B06 Gnd B07 Gnd B08 Gnd B09 Gnd - Frame ....................... 1 Ground Here is the pin layout as you look into the holes on the CGA and the Display's connector: 1 o 1-B9 letter "D" stamped on top o 6 2-B5 2 o 3-A5 9 8 7 6 5 4 3 2 1 o 7 4-A7 ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ 3 o 5-A4 A o o o o o o o o o o 8 6-A6 B o o o o o o o o o 4 o 7-n/c o 9 8-B3 5 o 9-B1 ADAPTER CABLE Diagram: CGA TO PCjr DISPLAY ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ PCjr CD Berg 2x9 Berg 9 pin D Shell 9 pin D Connector Header Female Male Female 2x9 Female 2x9 CGA Card Hood Hood Ú AB BA ¿/ \ ³ ³ÚÄÄ¿ ÚÄÄ¿³ 6" ÚÄ Ä¿ ³³oo³1 Ä×Ä 9³oo³³ CABLE 1³o \ / o³1 ³³oo³2 Ä×Ä 8³oo³³ 8 Wire Shielded ³ o³6 6³o ³ ³³oo³3 Ä×Ä 7³oo³³ 2³o ³ ³ o³2 ÄÄÄÄ´³oo³4 Ä×Ä 6³oo³ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄij o³7 7³o ³ "D"³³oo³5 Ä×Ä 5³oo³³"D" 3³o ³ ³ o³3 ÄÄÄÄ´³oo³6 Ä×Ä 4³oo³ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄij o³8 8³o ³ ³³oo³7 Ä×Ä 3³oo³³ 4³o ³ ³ o³4 ³³oo³8 Ä×Ä 2³oo³³ ³ o³9 9³o ³ ³³oo³9 Ä×Ä 1³oo³³ 5³o / \ o³5 ³ÀÄÄÙ ÀÄÄÙ³ ÀÄ ÄÙ À Pins Flipped Ù Pins ³ 1:9 9:1 1:1 ³ ADAPTER CABLE Wiring List: CGA TO PCjr DISPLAY ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ PCjr CD Berg 2x9 Berg CABLE 9 pin D Shell 9 pin D Connector Header Female 8 Wire Male Female 2x9 Female 2x9 Shielded CGA Card ÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄ B9 ............ B1 .... Green ........ 1 ......... 1 B5 ............ B5 .... Blue ........ 2 ......... 2 A5 ............ A5 .... Purple ........ 3 ......... 3 A7 ............ A3 .... Black ........ 4 ......... 4 A4 ............ A6 .... Brown ........ 5 ......... 5 A6 ............ A4 .... Red ........ 6 ......... 6 n/c n/c n/c 7 ......... 7 B3 ............ B7 .... Orange ........ 8 ......... 8 B1 ............ B9 .... Yellow ........ 9 ......... 9 ADAPTER CABLE Parts List: CGA TO PCjr DISPLAY ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Method 1: Modify IBM PCjr Adapter Cable # 1504643 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ QTY Supplier Description ÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 1 IBM IBM PCjr Adapter Cable P/N 1504643 1 AMP, 3M, Berg D-Subminiature Male 9-pin Solder 1 AMP, 3M, Berg 2x9 pin .100" Center Header Molex. ÚÄ¿ ÄÄÄÄ´ÄÃÄÄÄÄ ÄÄÄÄ´ÄÃÄÄÄÄ END View ÀÄÙ ³³ ³³ L = .023"min - .04"max Instructions: Replace the 9-pin D Female with the 9-pin Male. Open the 2x9 Connector and move the pin contacts to match the wiring list above. Plug the Adapter cable 2x9 connector to the PCjr Display matching the "D" to "D". Plug the Adapter Cable 9-pin D-Shell to the CGA and secure. Method 2: Build from scratch ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ QTY Supplier Description ÄÄÄ ÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 1 AMP, 3M, Berg D-Subminiature Male 9-pin Solder-Cup Connector 1 AMP, 3M, Berg D-Subminiature 9-pin Hood (Metal or Metalized) 6" Belden, etc. 8-Wire Shielded Cable 22 or 23 AWG Stranded 1 AMP, 3M, Berg 2x9 .100" Center Housing for Connector 18 AMP, 3M, Berg .100" Center Socket Contacts 1 AMP, 3M, Berg 2x9 .100" Center Hood (Metal or Metalized) 1 AMP, 3M, Berg 2x9 pin .100" Center Header Molex. ÚÄ¿ ÄÄÄÄ´ÄÃÄÄÄÄ ÄÄÄÄ´ÄÃÄÄÄÄ END View ÀÄÙ ³³ ³³ L = .023"min - .04"max Instructions: Solder on the 9-pin D Male and assemble Hood. Wire the 2x9 Connector to match the wiring list above and assemble Hood. Plug the Adapter cable 2x9 connector to the PCjr Display matching the "D" to "D". Plug the Adapter Cable 9-pin D-Shell to the CGA and secure. --- GEcho 1.00 * Origin: The Matrix BBS 704-535-7361 Area 704 Hub, SkyNet (1:379/33)